Teknamotor Skorpion 250R/90 판매용 - 폴란드

POA
POA
Teknamotor Skorpion 250R/90

기본정보

제품군목재 쪼개기 및 절단기
제작사/모델Teknamotor Skorpion 250R/90
제작년도2024
추가 선택신품
국가
마스쿠스 ID7CDA1EFC
+ 세부 정보 더보기

가격

가격POA

세부정보

평가 등급(1-5)
운반 중량1,150 kg
서비스 내역 전체예
제품 국가폴란드
어태치먼트Skorpion 250 R/90 is designed for shredding tree limbs and trunks with a diameter of up to 250 mm.

Overall dimensions (LxWxH) 2830 x 2400 x 2680 [A] / 1800 x 2100 x 2600 [B] [mm]
Weight 1450 [A] / 1150 [B] [kg]
Branch diameter 250 [mm]
No of knives 2 or 3 cutting + 2 counter-knife
Feeding speed up to 42 [running meters/min]
Chipping capacity up to 18 [stère meters/h]
Chip width from 9 to 14 [mm]
Feeding unit hydraulic feeder
Disk diameter 800 [mm]
Hopper dimensions (WxH) 420x255 [mm]
Min. power of tractor 80 [hp]

()* - dimension after the pipe is raised, during operation

Equipment included:
- Swivelled by360° ejection tube with deflector.
- PTO shaft.
- Own hydraulic system.
- Electronic system of work control with hour meter.
- Feeding table with a chain feeder.

Additional accessories on request:
- Extension of the ejection tube.
기타 정보Skorpion 250 R/90 is designed for shredding tree limbs and trunks with a diameter of up to 250 mm. Skorpion 250R/90 is a disc model with a pneumatic blow-out system on the disc. Chips are ejected through the rotating chimney which can turn by 360 degrees in relation to the chassis. The cutting system consists of a disc with cutting knives sharpened on either side.

This chipper is mounted on a single-axial chassis, adapted to tow it in the forest and field roads. There is also a version with a three-point system of linkage to the tractor (without single-axial chassis).

The chipper is designed to work with an over 80 hp farm tractor. The drive is transmitted from PTO shaft of a tractor with the speed of 540 or 1000 revolutions per minute.

The essential equipment of the chipper includes a hydraulic propulsion system that drives the feeding rollers and is driven by its own hydraulic pump.

Safety of the operator of a chipper is ensured by a cable safety switch attached, which - by pulling the cord in any direction - causes the hydraulic feed system to stop immediately. Unlocking the system takes place by releasing / unlocking the EMERGENCY STOP button to the work position.

Skorpion 250 R/90 is equipped with one of the most modern electronic No-stress systems available on the European market; the system automatically prevents overloading of the drive system by temporarily stopping the feeding. Editing the No-stress overload system allows you to easily change the machine settings and adjust them to individual needs. The program "thick wood", "thin wood" allows a quick change of the working mode of the chipper to suit the currently shredded material and more effective work of the wood chipper. This system has a built-in hourly meter.

The chipper is also additionally equipped with an electronic system of work control, protecting the machine against excessive duty through temporary stopping the feeding.

Overall dimensions (LxWxH) 2830x2400x2680 [A] // 1800x2100x2600 [B] [mm]
Weight 1450[A] / 1150[B] [kg]
Branch diameter 250 [mm]
No of knives 2 or 3 cutting + 2 counter-knife
Feeding speed up to 42 [running meters/min]
Chipping capacity up to 18 [stère meters/h]
Chip width from 9 to 14 [mm]
Feeding unit hydraulic feeder
Disk diameter 800 [mm]
Hopper dimensions (WxH) 420x255 [mm]
Min. power of tractor 80 [hp]

Equipment included:
-PTO shaft
-Independent hydraulic system
-Adjustment of height of ejecting the chips
-Rotary chimney 360°
-No-stress system

Additional accessories on request:
-Extension of the ejection tube
Teknamotor Sp. z o.o.
  • +48 ...SHOW
    판매자에게 연락을 하실때 마스쿠스를 언급해 주십시오.
Send e-mail

판매자 성/이름

  • TOMASZ SZCZEPANIAK

    Teknamotor Sp. z o.o.
    • +48 ...SHOW
      판매자에게 연락을 하실때 마스쿠스를 언급해 주십시오.
    • +48 ...SHOW
      판매자에게 연락을 하실때 마스쿠스를 언급해 주십시오.
    • +48 ...SHOW
      판매자에게 연락을 하실때 마스쿠스를 언급해 주십시오.
    • 언어: 독일어, 영어, 폴란드어, 러시아어, 우크라이나어
    • ul. Świętokrzyska 2a, 27-400 Ostrowiec Świętokrzyski, 폴란드

회사

TEKNAMOTOR SP. Z O.O.

14
마스쿠스 활동 기간
모든 광고
의심스러운 광고 보고
관련 브랜드
제작사광고 수
존디어1057
Timberjack481
Ponsse452
발멧407
캐터필러346

마스쿠스 코리아에서Teknamotor Skorpion 250R/90 목재 쪼개기 및 절단기를 찾을 수 있습니다. 이 Teknamotor Skorpion 250R/90의 가격은 -와 제품생산 2024에 근거합니다.이 기계는 - 폴란드에 위치하여 있습니다 . Mascus.co.kr에서 Teknamotor Skorpion 250R/90를 찾을 수 있으며 또한 더 많은 기타 모델의 목재 쪼개기 및 절단기도 찾을 수 있습니다. 세부정보 - 평가 등급(1-5): 5, 운반 중량: 1,150 kg, 서비스 내역 전체: 예, 제품 국가: 폴란드