코마츠 WA500-8E0 판매용 - 폴란드

POA
POA
Komatsu WA500-8E0

기본정보

제품군 휠로우더
제작사/모델코마츠 WA500-8E0
제작년도2019
사용시간15,924 시간
장비위치Grójec
국가
마스쿠스 ID6EF89C82
+ 세부 정보 더보기

가격

가격POA

세부정보

제조번호KMTWA134HKHH50153
기타 정보Asset Location: Grójec, Poland.

Type Wheel loader
Make, model KOMATSU WA500-8E0
Serial number KMTWA134HKHH50153
Machine identification number H50153
Year of manufacture 2019
Counter readings 15,924 mth
Engine type SAA6D140E7
Engine power 266 kW
Bucket capacity n.a. - plate illegible
Operating weight 36,500 kg
Transport length 9,780 mm
Transport width 3,150 mm
Transport height 3,800 mm
Travel speed 38 km/h
Maximum heap height 3,390 mm
Manufacturer KOMATSU Ltd. Japan (Made in Germany)

Indications of the on-board computer: error L04 - the need to verify by a specialized service

TECHNICAL DESCRIPTION
Operator''s position - seated, heated, air-conditioned cabin
Ignition type - automatic
Engine type - diesel
Basic equipment - found an oil leak in the lower part of the engine
Hydraulic systems
(pump, wires, actuators) - no comments
Lacquer coating - operational mechanical damage
Switchboard - set
Fluid leaks - an oil leak was found in the lower part of the engine and in the vicinity of the rear axle drive axle
Machine efficiency - no remarks
Repair and maintenance of the machine - not shown
Documents identifying the machine - not presented
Documents regarding the course of the machine - not shown
Efficiency test without load - done
Core Components:
ENGINE
The engine with accessories is complete with no visible lacks or mechanical damage.
The engine started. The engine operation does not raise any objections - a warning and a code are visible on the screen
error L04. The need for verification by a specialized service.
CHASSIS
Chassis components complete with no visible lacks.
Visible sweating in the area of ​​the rear drive axle.
Front axle tires GOODYEAR GP-4D 29.5 R25
Rear axle tires GOODYEAR GP-4D 29.5 R25
Tires equipped with protective chains.
Consumption percentage is estimated at approx. 30%

BODY
Yellow body with traces of mechanical damage and corrosion centers typical for
operation of this type of machines in places - on the surface of the bucket, working arm and counterweight.
The following damage was found:
- counterweight - scratched, corrosion centers,
- working arm - corrosion centers,
- entrance stairs with handrails (left and right) - abrasions of the varnish coating, corrosion centers,
- right cabin platform - dented, chipping of the lacquer coating with a corrosion center,
- internal handrail of the cabin door - scratched,
- mud shield of the front right wheel - traces of repairs, visible non-factory flat bar
securing the cover
- upholstery of the driver''s seat - worn.
EQUIPMENT
One key to the ignition switch and cabin locks was presented for inspection.
The machine is equipped with:
- air conditioning,
- reversing camera,
- FOGMAKER extinguishing system,
- EBERSPACHER additional heating,
- LOADRITE L2180 weighing system,
- TU900 performance reporting system.
Arkadiusz Utnik
  • +48 ...SHOW
    판매자에게 연락을 하실때 마스쿠스를 언급해 주십시오.
Send e-mail

판매자 성/이름

  • ARKADIUSZ UTNIK

    • +48 ...SHOW
      판매자에게 연락을 하실때 마스쿠스를 언급해 주십시오.
    • +48 ...SHOW
      판매자에게 연락을 하실때 마스쿠스를 언급해 주십시오.
    • Inflancka 4, 00-189 Warsaw, 폴란드

회사

DLL

10
마스쿠스 활동 기간
위치 및 정보
모든 광고
의심스러운 광고 보고
관련 브랜드
제작사광고 수
캐터필러34207
볼보8961
립헬8785
코마츠7088
JCB4321

마스쿠스 코리아에서코마츠 WA500-8E0 휠로우더를 찾을 수 있습니다. 이 코마츠 WA500-8E0의 가격은 -와 제품생산 2019에 근거합니다.이 기계는 Grójec 폴란드에 위치하여 있습니다 . Mascus.co.kr에서 코마츠 WA500-8E0를 찾을 수 있으며 또한 더 많은 기타 모델의 휠로우더도 찾을 수 있습니다. 세부정보 - 제조번호: KMTWA134HKHH50153, 사용시간: 15,924 시간