Lantzmann PROC20G+

Lantzmann PROC20G+ Firewood Processor: A powerful, fully hydraulic firewood processor equipped with a battery. Powered by a LIFAN petrol engine with an electric starter, hydraulic infeed system, and conveyor belt. Approximate fuel consumption: 3 l/h. The machine features a hydraulic infeed system and a conveyor belt measuring 320 cm in length and 15 cm in width. The conveyor belt is raised and lowered using a winch. The firewood length can be adjusted as required. The maximum log length is 55 cm, and the maximum diameter is 38 cm. The price includes a 3.2-metre conveyor with a winch and a 180 cm hydraulic infeed table with an electromagnetic switch. The chainsaw cuts the wood to the selected length. The splitter then divides the pre-cut log into two or four pieces, and the processed firewood is transported by the conveyor belt to the selected location. The maximum processing length is 550 mm, and the splitting force is up to 20 tonnes. Logs are cut using a hydraulically driven chainsaw. The machine can process almost any type of wood. The cutting and splitting tools are hydraulically operated. The firewood processor is equipped with a 3.2 m conveyor belt that can transport the processed wood directly onto a trailer. The maximum discharge height is 2 m. The average output of the 20-tonne model is 3–4 m³ per hour, depending on the type of wood and the operator’s experience. Various optional accessories are available, including a hydraulic log-lifting system and a hydraulic log infeed table. Technical Specifications with Petrol Engine: — Engine: 188F LIFAN petrol engine — Weight: 520 kg — Maximum log diameter: 38 cm — Maximum log length: 55 cm — Engine speed: 3,800 rpm — Saw chain: 18 inches (STIHL) — Cylinder bore: 4 inches — Working cycle time: 8 seconds — Tyres: 12 inches — Splitting wedge: 4-way, optional 6-way wedge Service and support are also available after purchase. We provide a warranty, servicing, spare parts.