Technoexport Extruder for the production of feed for fish, cats

The productivity of this line of equipment ranges from 50 to 200 kg per hour. Main drive power: 7.5, 11 and 22 kilowatts 1. They are equipped with their own hopper with a stirrer and feed screw. 2. They have a specific length and shape of the screw and screw chamber. 3. They are equipped with heating elements for pre-start heating. 4. They are equipped with special dies for forming the final product of the desired shape (bone, heart, triangle and any others in special order). 5. They have a module for adjusting the length of the output product. 6. Equipped with a removable housing for removing excess moisture released during extrusion. 7. Equipped with a multifunctional control cabinet with frequency converters to control the operation of the device. The extruder starts working after the screw chamber is preheated by heating elements. Once the operating temperature is reached, the prepared mixture is loaded into the extruder hopper. The operator regulates the feed of raw materials from the hopper to the screw chamber using a frequency converter. In the screw chamber, the raw materials are subjected to high pressure and temperature. The compressed mixture, when passing from the high-pressure zone into the free space of the forming die, foams under the influence of hot steam formed by the transition of moisture into a gaseous state. At the outlet of the die, the product is cut to the required size by adjusting the speed of the cutting mechanism motor. A VP-2 exhaust system can be connected to the moisture extraction housing, which effectively removes steam from the finished product outlet area. Unit productivity - 80-100 kg/hour Power consumption - 11 kW Motor reducer of the agitator - 0.25 kW Cutting knife drive - 0.37 kW Forced heating elements - 2.2 kW Overall dimensions: Length - 1.52 m Width - 0.87 m Height - 1.23 m Weight without motor - 263 kg