Technoexport Chopper-1200, 75 kW hammer mill for wood chips

We present to your attention a new product: the Chopper-1000 series hammer crusher. The concept of this product design is based on the synchronous operation of the crushing module with a 75 kW motor and the powerful traction of a passive cyclone for continuous collection of crushed raw materials. The hammer crusher, which receives raw materials through the loading hopper, has a screen with a mesh size of your choice and crushes the chips to the required fraction. The second part of the work is performed by a passive cyclone, in which the crushed raw material is poured down through a sluice gate, and the air with which this raw material was transported is vented through a filter located on the side of the product. Stable traction is provided by a fan with a direct drive from a 7.5 kW motor. The resulting sawdust can then be dried in aerodynamic dryers. If you need to obtain granulated compound feed or fuel briquettes, but the fraction of raw materials does not allow direct granulation, a hammer crusher from TechnoMashStroy will help you prepare the raw materials by grinding them to the fraction you need. This type of crusher is equipped with a 1000x800mm loading hopper for feeding raw materials into the crushing zone. Raw materials must be loaded by pouring them into the upper hopper of the crusher. The crushed raw materials are discharged through a pipe with a diameter of ___ mm. The crushed fraction is also discharged under pressure (together with air). This allows the raw materials to be transported over a considerable distance from the crusher to the cyclone. It is equipped with screens of your choice, depending on the type of raw material and the required grinding fraction. Hammer crushers are distinguished from their counterparts on the market by: Ease of operation Ease of maintenance Safety in operation Durability of construction Multiple safety margin Productivity of the CHOPPER hammer crusher - 1200 (75 kW) on wood chips - up to 1200 kg/hour